Sedana Trading
High Quality Tools and Equipment
Call: +971 6 5330551
Wood Working Equipment - Traditional
GB 60
| Technical Data: | |
| - Min/max edge height (mm) | 10-60 |
| - Min/max edge thickness (mm) | 0.3/3 |
| - Feed speed (mt/min) | 4 – 8 |
| - Min ray with concave warp (mm) | 20 |
| - Motor power. KW (HP) | 3(4) |
| - Working pressure (atm) | 7/8 |
G65 5T
| Technical Data: | |
| - Center distance between each chuck. (mm) | 32 |
| - Max thickness of the panels (mm) | 80 |
| - Max boring depth (mm) | 70 |
| - Chucks rotation speed (rpm) | 2800 |
| - Chucks of the horizontal unit (n°) | 21 |
| - Chucks of the vertical units (n°) | 2x11 + 2x11 |
| - Min-max distance between vertical heads(mm) | 150-1100 |
| - Motors power. KW(HP) | 1x 1,5(2) 4x 1,1(1,5) |
GF 21E
| Technical Data: | |
| - Chucks (n.) | 21 |
| - Center distance between chucks (mm) | 32 |
| - Center distance between first and last chuck (mm) | 640 |
| - Max thickness of the panel (mm) | 80 |
| - Max drilling depth (mm) | 100 |
| - Working table size (mm) | 860x400 |
| - Max size of the piece to drill (mm) | 850x3000 |
| - Chuck revolution (rpm) | 2800 |
| - Motor power. Kw (HP) | 1,5 (2) |
PF 510
| Technical Data: | |
| - Working table dimensions (mm) | 510x2700 |
| - Infeed table length (mm) | 1400 |
| - Outfeed table length (mm) | 1150 |
| - Sizes of the fence (mm) | 1350x170 |
| - Max. depth of cut. (mm) | 8 |
| - Spindle rotational speed. (rpm) | 5000 |
| - Ø of the spindle. mm (n°) | 116 (n°4) |
| - Motor power. KW(HP) | 4 (5,5) |
PSA 520 THICKNESSING MACHINE
| The machines are equipped with: |
| - Automatic lifting of the table |
| - Numerical height display unit (PSA 520-PSA 530/R) |
| - Electronic height display unit (PSA 630) |
| - 1 out-feed table roller (PSA 520-PSA 630) |
| - Helicoidal in-feed roller |
| - 2 Out-feed steel rollers(PSA 520-PSA 630) |
| - 1 Out-feed roller covered with rubber (PSA 520/R) |
| - Sliding table on 4 rails |
| - 'CE' standards |
| PSA 520 THICKNESSING MACHINE | |
| - 2 Out-feed steel rollers | |
| - 1 Roller on the table | |
| Technical data: | |
| - Working table PSA 520R-PSA 520 | 520x1000 mm |
| - Working table PSA 630 | 6300x1000 mm |
| - Min/max working height | 3/300 mm |
| - Max. removal 8 mm | |
| - Continuously adjustable feeding speed | |
| of the piece | 5-21 m/1' |
| - Motor power PSA 520R-PSA 520 | 5,5 hp (4 kw) |
| - Motor power PSA 520R-PSA 520 | 5,5 hp (4 kw) |
| - Motor power PSA 630 | 7,5 hp (5,5 kw) |
| - Net weight PSA 520R-PSA 520 | 725 kg |
| - Net weight PSA PSA 630 | 810 kg |
PSA 630 THICKNESSING MACHINE
| The machines are equipped with: |
| - Automatic lifting of the table |
| - Numerical height display unit (PSA 520-PSA 530/R) |
| - Electronic height display unit (PSA 630) |
| - 1 out-feed table roller (PSA 520-PSA 630) |
| - Helicoidal in-feed roller |
| - 2 Out-feed steel rollers(PSA 520-PSA 630) |
| - 1 Out-feed roller covered with rubber (PSA 520/R) |
| - Sliding table on 4 rails |
| - 'CE' standards |
| PSA 630 THICKNESSING MACHINE | |
| - 2 Out-feed steel rollers | |
| - 1 Roller on the table | |
| Technical data: | |
| - Working table PSA 520R-PSA 520 | 520x1000 mm |
| - Working table PSA 630 | 6300x1000 mm |
| - Min/max working height | 3/300 mm |
| - Max. removal 8 mm | |
| - Continuously adjustable feeding speed | |
| of the piece | 5-21 m/1' |
| - Motor power PSA 520R-PSA 520 | 5,5 hp (4 kw) |
| - Motor power PSA 630 | 7,5 hp (5,5 kw) |
| - Net weight PSA 520R-PSA 520 | 725 kg |
| - Net weight PSA PSA 630 | 810 kg |
| - Noise level according to CE 860 standards | 77,4 db (A) |
GSV 13-14
| Technical Data: | GSV 13 | GSV 14 |
| - Max vertical cu height (mm) | 1900 | 2200 |
| - Max horizontal cut height (mm) | 1700 | 2080 |
| - Max cut length (mm) | 3200 | 4200 |
| - Max cut thickness (mm) | 60 | 60 |
| - Motor power. KW (HP) | 3(4) | 3(4) |
| - Blade diameter. (mm) | 250 | 250 |
| - Spindle rotation speed. (rpm) | 5300 | 5300 |
LM 410
| Technical Data: | |
| - Planning working table sizes (mm) | 410X1610 |
| - Thicknessing working table sizes (mm) | 410X750 |
| - Saw and spindle moulder working table sizes (mm) | 490X1060 |
| - Diam. of the spindle with 3 knives (mm) | 95 |
| - Spindle rotation speed | 4200 |
| - Max. thicknessing working height (mm) | 230 |
| - Diam. of feeding rollers | 40 |
| - 4 speeds spindle moulder | 1400-3500-6000-8000 |
| - Diam. of table collars. | 75-105-140-180 |
| - Standard diam. of spindle moulder shaft. | 30 |
| - Max. diam. of the tool | 200 |
| - Useful length of spindle moulder shaft | 130 |
| - Blade tilt. | 0°-45° |
| - Max. blade diam | 300 |
C 45
| Technical Data: | |
| - Sliding table sizes (mm) | 385 X 2600 |
| - Cross-cut capacity sliding table 2600 (mm) | 2700 |
| - Cross-cut capacity sliding table 3200 (mm) | 3260 |
| - Main blade dia. (g/1'-u/1'-rpm) | 3200-4000-6000 |
| - Cut height at 90° (mm) | 130 |
| - Cut height at 45°. (mm) | 90 |
| - Blade tilt. | 0°-45° |
| - Scoring blade dia. (mm) | 125 |
| - Cut width between blade and rip fence (mm) | 1250 |
| - 2 suction hoods dia. | 80-100 |
| - Motor power (EXP) diam. mm | 60-100 |
SNA 700 BAND SAW 3 HP
| The machines are equipped with: | |
| - Cast iron solid flywheels (SNA 400-500-600-700 / SNAC 540) | |
| - Cast iron arms flywheels | |
| (SNA 800 / SNAC 640-740-840-940) | |
| - Cast iron solid flywheels (SNAC 740R-940R) | |
| - Tilting table | |
| -Max. blade width 80 mm. (SNAC 740R) | |
| - Max. blade width 90 mm. (SNAC 940R) | |
| - Upper blade guide with bearings (SNA - SNAC) | |
| - Lower blade guide with wooden elements SNA | |
| - Lower blade guide with bearings SNAC | |
| - Lower and upper blade guide with wooden elements | |
| SNAC 740 R - SNAC 940 R | |
| - Blade tension indicator | |
| - Bronze cleaners on the 2 flywheels SNAC 740R-940R | |
| - Automatic lubrication circuit SNAC 740R-940R | |
| - Blade guard with rack movement | |
| - Double suction point SNAC 740R-940R | |
| - Blade guard with rack movement | |
| - Max cut height 600 mm. |
TRC/N MORTISING MACHINE WITH FIXED TABLE
| Technical data TRC/N: | |
| - Longitudinal stroke of the head | 240 mm. |
| - Transverse stroke of the head | 180 mm. |
| - Vertical stroke of the head TRC/N fixed table | 160 mm. |
| - Vertical stroke of the head TRC/N tilting table | 140 mm. |
| - Vertical stroke of the head TRC/N turning table | 140 mm. |
| - Working table sizes | 565x315 mm. |
| - Westcott chuck | 0-20 mm. |
| - Chuck rotation speed | 3000 r.p.m. |
| - Motor power | 2 hp (1,5 kw) |
| - Net weight | 260 kg. |
| - Noise level according to DIN 45635/1600 | 66,9 db (a) |
| - 'CE' Standards |
G450
| Technical Data: | |
| - Head vertical stroke (mm) | 180 |
| - Head transversal stroke (mm) | 150 |
| - Head longitudinal stroke (mm) | 230 |
| - Working table vertical stroke (mm) | 90 |
| - Working table dimensions (mm) | 540x110 |
| - Working table tilt (±) | 45° |
| - Head rotation (±) | 45° |
| - Max head height. (mm) | 6000 |
| - Chain motor power. KW (HP) | 950 |
| - Vertical spindles motor power. KW (HP) | 2,2(3) |
GAMMA/90
Clamping press for windows and doors. Corpus press semiautomatic and automatic. Hot and cold, single and multi-daylights for the production of panels overlaid with veneer, HPL, LPL, decorative papers. Embossing presses for bending massive wood. Membrane presses to glue on the shape panels PVC, PPL, veneer. Automatic pressing line for panels.
Mod. R/3 130
-
Maximum working thickness mm. 70
-
Feeding speed mtpm 20
-
Nr. 2 spreading roller diam. mm. 185
-
Motorgear power Kw. 0,37
-
Nr. 2 glue dosing blades with micrometric adjustment.
-
Safety screens with electric interlock.
GM 104 - GM 104
| Technical Data: | GM 104S | GM 104E |
| - Min/max pitch of saws and belts teeth (mm) | 3 – 25 | 3 - 25 |
| - Max blade width (mm) | 50 | 50 |
| - Min/max dia. of the panel saw (mm) | 110-600 | 110-600 |
| - Grinding motor power. KW (HP) | 0,20 | 0,20 |
| - Motor power. KW (HP) | 0,20 | 0,20 |
| - Teeth sharpened per min. (n°) | 70 | 70 |
| - Grindstone dia. (mm) | 152 | 152 |
G 60 ROUTER WITH TILTING HEAD
| G 60 ROUTER WITH TILTING HEAD | |
| Technical data: | |
| - Belt transmission | |
| - Pneumatic control | |
| - Chuck MK2 complete with 3 collets: 6-8-9,5 | |
| - Selfbraking motor | |
| - Working table sizes | 800x600 mm. |
| - Chuck rotation speed | 9000-18000 r.p.m. |
| - Motor power G 60 | 2/3 hp (1,5/2,2 kw) |
| - Motor power G 80 - G 90 | 3/4 hp (2,2/3 kw) |
| - Net weight G 60 | 290 kg. |
| - Net weight G 80 | 360 kg. |
| - Net weight G 90 | 410 kg. |
| - 'CE' standards |
T 220 SPINDLE MOULDER
| The machine is equipped with: |
| - 3 positions adjustable spindle guard fence and |
| with rack movement (max. dia. of the tool 260 mm.) |
| - Reverse spindle switch |
| - Safety guard |
| - Guard for working on the spindle |
| - Height numerical read-out |
| - Suction dust hood dia. 120 mm. |
| - 'CE' standards |
| T 220 SPINDLE MOULDER | |
| Technical data: | |
| - Working table sizes | 1200x730 mm. |
| - Working shaft: | |
| * Useful height with dia. 30-35 mm. | 140 mm. |
| * Useful height with dia. 40-50 mm. | 180 mm. |
| * Stroke | 210 mm. |
| * Rotation speed | 3000-4500-6000 |
| 8000-10000 r.p.m. | |
| - Max. sizes of the tool reentering under | |
| the working table | 320x90 mm. |
| - Motor power | 7,5 hp (5,5 kw) |
| - Net weight | 590 kg. |
| - Noise level according to CE standards | 75,3 db (A) |
