Compressed Air Equipment - Screw Compressors

GIGA 7510

GIGA 10010

The Rotar GIGA is available - with its power versions between 55 and 75 kW - in 7.5 and 10 bar versions. In this industrial compressor range we paid particular attention to the functional features, to the easy access for maintenance operations. Indeed, it is easy to operate on all components thanks to the wide side doors, fitted with safety closing handles. Any service operation is thus easy and quick. Thanks to the super silencing system, already integrated in the machine, noise pressure level (72 dB(A)) is among the lowest of this category.
Rotar GIGA: the power you need, protecting the environment!

---

Mega 50, Mega 60

“FiniTronic” digital controller The digital controller offers working pressure and oil mist separator tank inner pressure indication, separator filter clogging flashing alarm before overpressure E-stop, electric motor temperature control, maximum screw assembly temperature control, air temperature on pressure end indication, electric motor direction of rotation check, time to scheduled maintenance term (oil, oil filter, air filter, separator filter), total operating hours and operating hours under load, alarm log of last five failure events.

---

Plus 20, Plus 30, Plus 40

Rotary screw compressors of the Rotar PLUS series are designed for continuous duty in very hard conditions of use. These products reflect special attention on energy consumption, low operating and maintenance costs, simple installation and ease of use. The production cycle - design, mechanical operations, assembly, testing, packing and shipping - takes place entirely in Fini. Each product, built according to the standard rules, is carefully controlled in every phase of this process by skilled staff to guarantee that the specific tests on quality and operation are fully passed.

---

BSC 20

The complete package on a 500-lt tank is slightly more than one square meter. Easy to transport and install thanks to our standard palletizing and a max. width of 70 cm.
The machine is delivered ready for use. Just plug it in for a powerful performance. Without wasting any time your productivity will improve immediately.

---

Cube 10, Cube 7

Less moving components than in reciprocating systems where the moving elements which take part in the compression are at least 15: shaft, connecting rods, pistons, compression rings, intake valves, discharge valve. In screw systems the compression takes place with two moving components only: the male rotor and the female rotor. This leads to reduce troubles and maintenance costs.

---

---

Model	Motor Power	Flow Rate	Maximum Pressure	Dimension LxDxH (cm)	Weight
CUBE 10	7.5Kw-10HP	990 l/min 34.8 c.f.m	10 bar	65 x 73 x 96	122 Kg
BSC 1508	11Kw-15HP	1650 l/min 58.3 c.f.m	8 bar	87 x 76 x 103.5	230 Kg
BSC 1510	11Kw-15HP	1490 l/min 52.6 c.f.m	10 bar	87 x 76 x 103.5	230 Kg
BSC 1513	11Kw-15HP	1200 l/min 42.4 c.f.m	13 bar	87 x 76 x 103.5	230 Kg
BSC 2008	15Kw-20HP	2300 l/min 81.2 c.f.m	8 bar	87 x 76 x 103.5	250 Kg
BSC 2010	15Kw-20HP	200 l/min 70.6 c.f.m	10 bar	87 x 76 x 103.5	250 Kg
BSC 2013	15Kw-20HP	1600 l/min 56.5 c.f.m	13 bar	87 x 76 x 103.5	250 Kg
PLUS 2508	18.5KW-25HP	2700 l/min 95.4 c.f.m	8 bar	112 x 75 x 128	375 Kg
PLUS 2510	18.5KW-25HP	2450l/min 86.6 c.f.m	10 bar	112 x 75 x 128	375 Kg
PLUS 2513	18.5KW-25HP	2050 l/min 72.4 c.f.m	13 bar	112 x 75 x 128	375 Kg
PLUS 3008	22KW-30HP	3300 l/min 116 c.f.m	8 bar	122 x 75 x 133	386 Kg
PLUS 3010	22KW-30HP	2890 l/min 102 c.f.m	10 bar	122 x 75 x 133	386 Kg
PLUS 3013	22KW-30HP	2300 l/min 81 c.f.m	13 bar	122 x 75 x 133	386 Kg
PLUS 4008	30KW-40HP	4120 l/min 145 c.f.m	8 bar	122 x 75 x 133	412 Kg
PLUS 4010	30KW-40HP	3900 l/min 138c.f.m	10 bar	122 x 75 x 133	412 Kg
PLUS 4013	30KW-40HP	3125 l/min 110 c.f.m	13 bar	122 x 75 x 133	412 Kg
MEGA 5008	37KW-50HP	5700 l/min 201 c.f.m	8 bar	180 x 94 x 137	732 kG
MEGA 5010	37KW-50HP	5100 l/min 180 c.f.m	10 bar	180 x 94 x 137	732 kG
MEGA 5013	37KW-50HP	4100 l/min 145 c.f.m	13 bar	180 x 94 x 137	732 kG
MEGA 6008	45KW-60HP	7200 l/min 254.4 c.f.m	8 bar	180 x 94 x 137	795 KG
MEGA 6010	45KW-60HP	6500 l/min 229.7 c.f.m	10 bar	180 x 94 x 137	795 KG
MEGA 6013	45KW-60HP	5100 l/min 180.2 c.f.m	13 bar	180 x 94 x 137	795 KG
GIGA 7508	55KW-75HP	9300 l/min 329 c.f.m	7.5 bar	130 x 220 x 200	1912 KG
GIGA 7510	55KW-75HP	8300 l/min 293 c.f.m	10 bar	130 x 220 x 200	1912 KG
GIGA 10008	55KW-100HP	12200 l/min 431 c.f.m	7.5 bar	130 x 220 x 200	1982 KG
GIGA 10010	75KW-100HP	10500 l/min 371 c.f.m	10 bar	130 x 220 x 200	1982 KG